SILENT KNIGHT 4720 Bedienungsanleitung PDF herunterladen (Seite 6)

Section 2. System Overview

User's Manual Page 3

Access Codes

An access code is a confidential number, 3 to 6 digits in length. You enter

this code into the system touchpads to program, arm and disarm, and

command all functions of the system.

Note: When selecting access codes for your system, do not use numbers

such as 1111, 2222, and so forth. While they are easy codes for you

to remember, they may also be easy codes to break.

Installer’s Code (Code 0)

Your installation company uses this special code to install and initially

program your system. It can also be used to arm and disarm your system,

both from the touchpads and from the central station (by telephone lines).

If you do not want the installation company to have access to your system

once it has been installed, ask the installer for the installation code and

instructions for changing it. Once you have changed the code, only you can

arm and disarm the system. If it becomes necessary to change the

programming of your system, you will have to give the installation company

the new code. Talk to your installer about the installation code. There are

many reasons why you might want your installation company to be able to

access your system at any time.

Main User’s Code (Code 1)

Warning

Without this number, it is virtually impossible for anyone to re-

program or reset your security system.

Code 1 (sometimes known as the master code) enables you to change other

code numbers, and change the day and time shown on your touchpad liquid

crystal display (LCD) and optional printer. This main user code number

should be written down and stored for periodic use in a safe, secure place.

Because code 1 can activate the Walk Test mode, during which the 4720 is

temporarily prevented from responding to an actual fire alarm, code 1

cannot be used by the end user in a UL commercial fire installation. Your

installer must reprogram options and perform other tasks that require the use

of code 1.

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Keine Kommentare

SILENT KNIGHT 4720 Bedienungsanleitung Seite 6