SILENT KNIGHT 5104B Installationshandbuch Seite 8

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 46
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 7
System Overview
P/N 151253 5
3.3 Notification Appliance Circuit Terminals
Terminals 3 through 10 are the NAC terminals. Each of the four outputs is rated at 3 amps,
though you can only draw a total of 9 amps from the 5499. The 5499 outputs are short-circuit
protected (power limited) according to UL 864 standards. Overcurrent indicators are yellow
LEDs. The output voltage can vary depending on the load and input voltage.
The four power-limited notification outputs can be configured as follows:
Four Class B circuits Faraday synchronized outputs
Two Class A circuits Gentex synchronized outputs
One Class A and two Class B circuits System Sensor synchronized outputs
Class B, ANSI temporal-coded circuits Wheelock synchronized outputs
AMSECO synchronized outputs
One or both 5499 signal inputs control the NACs, depending on the specific configuration
setup. Possible configurations for the 5499 are:
You can select which input controls which output, and which inputs are Class A and Class B
using the 7-position DIP switch on the printed circuit board. See Section 4.10 for DIP switch
settings.
For Option: These Inputs: Control These Outputs: As:
1 Input 1 All outputs Class B circuits
2
Input 1 or
Outputs 1, 2, 3, and 4
Class B ANSI temporal-
Input 2 coded circuits
3
Input 1 Outputs 1 and 2 Class B circuits
Input 2 Outputs 3 and 4 Class B circuits
4
Input 1 Output 1 Class B circuits
Input 2 Outputs 2, 3, and 4 Class B circuits
5 Input 1 Outputs 1-2 and 3-4 Class A circuit pairs
6
Input 1 Outputs 1 and 2 Class B ANSI temporal-coded circuits
Input 2 Outputs 3 and 4 Class B circuits
7
Input 1 Outputs 1-2 Class A circuit pair
Input 2 Outputs 3-4 Class A circuit pair
8
Input 1 Outputs 1-2 Class A circuit pair
Input 2 Outputs 3 and 4 Class B circuits
9
Input 1 (Strobe Control)
All outputs
Class A or Class B
Input 2 (Audio Control) Faraday Sync. Output
10
Input 1 (Strobe Control)
All outputs
Class A or Class B
Input 2 (Audio Control) Gentex Sync. Output
11
Input 1 (Strobe Control)
All outputs
Class A or Class B
Input 2 (Audio Control) System Sensor Sync. Output
12
Input 1 (Strobe Control)
All outputs
Class A or Class B
Input 2 (Audio Control) Wheelock Sync. Output
13
Input 1 (Strobe Control)
All outputs
Class A or Class B
Input 2 (Audio Control) AMSECO Sync. Output
Seitenansicht 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 45 46

Kommentare zu diesen Handbüchern

Keine Kommentare