SILENT KNIGHT 4720 Installationshandbuch PDF herunterladen (Seite 16)

Regency

Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98

When a touchpad is in use and access is attempted at another location, the second location will

receive a SYSTEM BUSY message. However, the system will respond to a panic key activa-

tion or exit request at the second location. Touchpads are assigned to a group of areas for area

control (see Section 8.5 of this manual).

4.2 Touchpad Functions

The Model 4724 Control Expander provides the following additional touchpad functions:

4.2.1 Display Alarms

Press the MEM key to display alarms.

4.2.2 Display Troubles and Supervisories

Press the STAT key to display troubles or supervisories.

4.2.3 Toggle X-10s

To toggle X-10 Modules on and off, press a number from 11-42, then * or CODE 2, followed

by either “1” for on or “0” for off.

■ Numbers 11-26 activate modules 1-16 from House Code 1.

■ Numbers from 27-42 activate modules 1-16 from House Code 2.

The house codes for each section are programmed into the EEPROM (electrically erasable pro-

grammable read-only memory). The display shows the actual house code and module address

activated.

Table 1: Panic Key Zones

Zone Generated by Key

Station 0 1 2 3 4 5 6 7

Duress Code 145 149 153 157 161 165 169 173

Keys

Police 146 150 154 158 162 166 170 174

Aux 147 151 155 159 163 167 171 175

Fire 148 152 156 160 164 168 172 176

Station 8 9 10 11 12 13 14 15

Duress Code 177 181 185 189 193 197 201 205

Keys

Police 178 182 186 190 194 198 202 206

Aux 179 183 187 191 195 199 203 207

Fire 180 184 188 192 196 200 204 208

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 81 82

Keine Kommentare

SILENT KNIGHT 4720 Installationshandbuch Seite 16