SILENT KNIGHT 4720 Installationshandbuch PDF herunterladen (Seite 48)

Regency

Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98

ARS#1_ _ _ _ _ _ _ _

Select the areas to be accessed by Touchpad 1.

NOTE When a panic key is pressed on a touchpad, all areas controlled by that touchpad go into

alarm.

INTERCOM#1:NO

This option enables the Intercom Function for Touchpad 1.

NOTE Do NOT select the Door option on an intercom station, as this would disable the TEL key.

DOOR#1:NO

When this option is selected, door access can be gained by entering a secret code on Touchpad

NOTE On some touchpad models, the Door and Intercom options are not available together. It is pos-

sible to select NO for both options.

HIGH SEC#1:NO

When this option is selected, the High Security Code must be entered in addition to the secret

code to gain door access.

DOOR ONLY#1:NO

When this option is selected, Touchpad 0 can be used only for door access, not for other func-

tions, such as arming and disarming.

STATION:#2

Select the next touchpad for which options are to be programmed (up to 15 touchpads).

8.14 Key Zones (Menu 13)

STATION:#0

Select the touchpad for which the panic key zones are to be programmed (0-15 touchpads).

NOTE Station 0 options are not used. Begin programming with Station 1.

KEY:UNUSED

Select the panic key for which you want to program options. Although the display shows

KEY:UNUSED there is no “unused” key. Instead, you must select a panic key. Select 1 for the

POL, 2 for the AUX key, and 3 for the FIRE key.

TYPE:

Select a zone type for the key you specified in the last step. Enter the number shown next to the

appropriate zone type in Table 12.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 81 82

Keine Kommentare

SILENT KNIGHT 4720 Installationshandbuch Seite 48