SILENT KNIGHT 4720 Installationshandbuch PDF herunterladen (Seite 20)

Regency

Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98

7.4 Correcting Errors

NOTE If you have not touched the TEST key, you can correct an error by pressing CLR.

The LCD will show 0 or the first choice. Type in the correct data, then press the TEST key.

If you begin to program the wrong option, and you have not yet pressed the TEST key, press

the CHM key. This will cancel the new data and restore the default data. Press the TEST key

to advance to the next option.

NOTE The CHM key will restore the factory-programmed default value of any option.

7.5 Entering Text

There are several menus that require text and other characters to be entered (for example, zone

location descriptions). The display will show the current programmed text on the first line of

the display, with an underscore character (or cursor) denoting the end of the programmed text.

The second line will momentarily show the option name, followed by numbered groups of

symbols.

7.5.1 General Form

To enter text or characters, follow the procedure below, referring to Table 2.

1. Find the character you want in the area below and to the right of the double lines.

2. Press the digit to the left of the vertical double line in the same row.

3. Press the digit above the horizontal double line in the same column.

The character will appear on the top line of the display. Continue selecting characters this way,

until you have finished programming the message.

■ Pressing the STAT key will erase the last character you typed.

■ Pressing the BYPS key will move the cursor to the right, entering a blank space after

the last character you typed.

■ Pressing the CLR key will erase the text and place the cursor at the beginning of Line 1.

4. If you select the wrong group of letters when you press the first digit, press MUTE or

CLR return to Step 2.

7.5.2 Hints for Use with the General Form

1. To enter capital letters, press the number that corresponds to the letter's position in the

alphabet (e.g., 0 1 for “A” and 2 6 for “Z”).

2. To enter numbers as part of the text, press 6 followed by the desired number (e.g., TEST

0 for “0” and so on).

3. The numbers 96-99 will cause a “beep” character of varying duration to be entered into

the text. If beeps are inserted into the text, the touchpad will beep whenever the text is dis-

played. The cursor does not move when a beep is entered into the text.

4. The # and * keys, if needed for phone numbers, can be entered into the keypad: type 7 3

for “#” and 8 0 for “*.”

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 81 82

Keine Kommentare

SILENT KNIGHT 4720 Installationshandbuch Seite 20