SILENT KNIGHT 5104B Installationshandbuch PDF herunterladen (Seite 4)

P/N 151253 1

Section 1

Introduction

The Model 5499 is a notification and auxiliary power expander that provides up to 9 amps of

filtered, 24 volt power for powering notification appliances and auxiliary devices. The 5499

provides its own AC power connection, battery charging circuit, and battery connections.

Used with security and fire panels, the 5499 enables you to connect and distribute power to

many more devices than your panel may normally allow.

• Input Configurations

The 5499 has two optically isolated signaling inputs that provide the signal connection

from the main control panel to the 5499 (see Section 3.2 for more details).

• Output Configurations

The 5499 has four power-limited notification appliance circuits that can be configured in

various combinations of Class A and Class B circuits (see Section 3.3 for more details).

• Auxiliary Power Configurations

The 5499 has a dedicated, power-limited, auxiliary output that can be configured in two

different ways. The auxiliary output can either be non-resettable (always on), or

configured to switch off when the AC power goes off to conserve the battery standby

power. When the auxiliary power is configured to switch off, there is a 30 second delay

before the auxiliary power is turned off after the AC power goes off (see Section 4.10.4 for

more details).

• Form C Trouble Relay

The 5499 includes a general trouble relay that will de-energize for any trouble situation on

the 5499 (see Section 4.5 for more details).

• Earth Fault Detection

The 5499 monitors for earth faults to the system power or system ground. When detected,

the system de-energizes the trouble relay and the input supervision relays (see Section 6.2

for details).

• ANSI Temporal Code

The 5499 provides two configuration options that will drive outputs with the ANSI

temporal code if the inputs are on constant (see Section 4.10.1 for details).

• Supports Synchronization appliances

The 5499 provides configuration options that will eliminate the need for sychronization

modules when using AMSECO, Faraday, Gentex, System Sensor or Wheelock sync

appliances.

1 2 3 4 5 6 7 8 9 ... 45 46

Keine Kommentare

SILENT KNIGHT 5104B Installationshandbuch Seite 4